Modern heat-pump water heater installed in a finished utility space

Source-backed reviews. Clear comparisons.

Choose a heat-pump water heater with confidence.

Compare exact sizes, prices, specifications, and owner feedback in one place.

Compare by size Estimate savings & rebates
  • Source-linked evidence
  • Every capacity clearly labeled
  • No account required

Choose a manufacturer and size

Pick a size, explore the evidence, and compare up to four products.

Manufacturer reviews

Start with a size range

Choose a range to update the manufacturer cards. You can then select any exact size on each card and compare different capacities if you want.

Showing the closest available 50–58 gallon model from each manufacturer.

ManufacturerRheem
Rheem PROPH40 T2 RH375-SO heat pump water heater

Official manufacturer details

Rheem PROPH40 T2 RH375-SO

Choose exact size
Rated storage
36 gal
First hour
60 gal
Input voltage
240 V
UEF
3.75
Noise level (dBA)
49 dBA
Sound evidencemanufacturer exact-model table; distance/mode not stated Source for the selected size (opens in a new tab)
Minimum room air
700 ft³; smaller w/ ventilation/ducting
Requirement detailsUnducted rooms above 700 ft³ need no added ventilation. Below 700 ft³ use a fully louvered door or top/bottom louvers; the small-closet arrangement requires an 18 in² / 0.75-in door gap plus an exhaust-height louver and exhaust within 12 in of the door. One-duct layouts require the stated transfer opening; both inlet and outlet ducted permits any-size room with no added ventilation. No lower universal numeric volume is stated. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Dimensions
62 5/16 in H × 20 1/4 in diameter
Open full review
ManufacturerCala Systems
Cala Systems RDH6524M1 heat pump water heater

Official manufacturer details

Cala Systems RDH6524M1

Choose exact size
Rated storage
61 gal
First hour
78 gal
Input voltage
240 V
UEF
3.76
Noise level (dBA)
48 / 49–52 dBA
Sound evidenceexact-model manufacturer sources with different test/disclosure context This range conflicts with the 48 dBA qualified internal test in the September 2025 specification. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Minimum room air
700 ft³; smaller w/ louvers/ducting
Requirement detailsCala says ducting is not required if the room is larger than 700 ft³. Below 700 ft³, ducting is also not required with a fully louvered door, top-and-bottom door louvers, or a top louver aligned with and facing the outlet plus at least 20 in² open area under the door. Otherwise the installer must determine an approved duct configuration. No lower universal numeric volume is stated. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Dimensions
67 in H × 24 in diameter
Open full review
ManufacturerGE Profile
GE Profile GeoSpring PH50S10BNY01 heat pump water heater

Official manufacturer details

GE Profile PH40S10BPY

Choose exact size
Rated storage
40 gal
First hour
64 gal
Input voltage
240 V
UEF
4.2
Noise level (dBA)
41 dBA
Sound evidenceENERGY STAR exact-record sound_pressure_level; NEEA 8.1 manufacturer context Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Minimum room air
700 ft³; smaller w/ ≥240 in² louvers/ducting
Requirement detailsGE requires at least 700 ft³ for the common indoor installation. A smaller room is allowed with a fully louvered door, two louvered sections at the top and bottom, or the GE duct kit. Louvers must provide at least 240 in² / 0.15 m² open area. The manual does not state a lower universal numeric volume. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Dimensions
59 1/2 in H × 24 in diameter
Open full review
ManufacturerA. O. Smith
A. O. Smith HPTA-50 heat pump water heater

Official manufacturer details

A. O. Smith HPTA-40

Choose exact size
Rated storage
36 gal
First hour
55 gal
Input voltage
208–240V
UEF
3.6
Noise level (dBA)
45 dBA
Sound evidencemanufacturer operation statement; measurement distance/mode not stated Source for the selected size (opens in a new tab)
Minimum room air
450 ft³; 84 ft³ w/ air exchange
Requirement detailsThe current HPTA Series 210 manual requires at least 450 ft³ without added air exchange. Enclosures from 84–449 ft³ are permitted only with one of the manual's transfer-air arrangements: fully louvered door; upper and lower wall grilles; or upper grille plus a 3/4-in door undercut / at least 18 in² net free opening. Each wall grille must be at least 22 × 6 in or 130 in² net free area. Factory duct adapters are also supported; follow the duct section rather than treating 84 ft³ as an unconditional minimum. Source for the selected size (opens in a new tab)
Dimensions
64 3/4 in H × 20 in diameter
Open full review
ManufacturerAriston
Ariston ARIHPWH-50 heat pump water heater

Official manufacturer details

Ariston ARIHPWH-40-T

Choose exact size
Rated storage
37 gal
First hour
65 gal
Input voltage
208–240V
UEF
3.55
Noise level (dBA)
45.0 dBA at 6 ft
Sound evidencethird-party certified test procedure stated by exact-model-set specification This exact-model-set document is hosted by a major plumbing distributor, not on the current Ariston domain. The Ariston-domain non-T Side-Connect document reports 49.1 dBA for different model identifiers and is not substituted for these -T choices. Source for the selected size (opens in a new tab)
Minimum room air
700 ft³; smaller w/ ventilation/ducting
Requirement detailsWithout ducts, a room of at least 700 ft³ needs no added ventilation. Below 700 ft³, the official manual requires a fully louvered door or top-and-bottom louvers; its small-closet arrangement requires an 18 in² / 0.75-in under-door opening plus an exhaust-height louver and exhaust within 12 in of the door. With only inlet or outlet ducting, an 18 in² / 0.75-in under-door opening is required. With both inlet and outlet ducted, the manual permits any room size with no added ventilation. No lower universal numeric volume is stated. Source for the selected size (opens in a new tab)
Dimensions
56 1/2 in H × 22 3/4 in diameter
Open full review
ManufacturerBosch
Bosch GreenTronic 7000 T heat pump water heaters

Official manufacturer details

Bosch TR7000T-50US

Choose exact size
Rated storage
47 gal
First hour
69 gal
Input voltage
208–240V
UEF
3.75
Noise level (dBA)
49 dBA
Sound evidenceENERGY STAR sound_pressure_level; manufacturer family operating-sound claim Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Minimum room air
700 ft³; 84 ft³ w/ louvers
Requirement detailsThe model-specific table sets 700 ft³ for an enclosed, not-fully-ducted room with no transfer opening. A fully louvered door, upper/lower louvers, or upper louver plus undercut door permits 84 ft³. An upper louver or undercut plus one duct, or both inlet and outlet ducted, has 'None' in the manual's minimum-space column. That 'None' is configuration-specific and does not waive clearances or duct rules. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Dimensions
66 1/2 in H × 21 3/4 in diameter
Open full review
ManufacturerBradford White
Bradford White AeroTherm heat pump water heater

Official manufacturer details

Bradford White RE2H50S10-1NCTT

Choose exact size
Rated storage
45 gal
First hour
65 gal
Input voltage
208–240V
UEF
3.44
Noise level (dBA)
<50 dBA avg.
Sound evidencemanufacturer AeroTherm series operating-sound statement The brochure names the core models but does not separately publish the curated -1NCTT suffix variants. Source for the selected size (opens in a new tab)
Minimum room air
700 ft³; smaller w/ ≥240 in² louvers/ducting
Requirement detailsThe manual says the unit is designed for an indoor space of at least 700 ft³. A smaller room is allowed with a fully louvered door or two louvered sections at the top and bottom of the door/wall; louvers should provide at least 240 in² open airflow area. The official ducting kit is another documented alternative for rooms below 700 ft³ or without louvered doors. No lower universal numeric volume is stated. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Dimensions
59 3/8 in H × 21 3/4 in diameter
Open full review
ManufacturerLG
LG APHWC501M heat pump water heater

Official manufacturer details

LG APHWC501M

Choose exact size
Rated storage
53 gal
First hour
76 gal
Input voltage
208–240V
UEF
3.93
Noise level (dBA)
42–45 dBA by mode
Sound evidencemanufacturer dB(A) table by operating mode Source for the selected size (opens in a new tab)
Minimum room air
700 ft³ minimum
Requirement detailsLG's official installation instructions state a 700 ft³ minimum room size. No manufacturer-approved smaller-room louver or duct alternative was found in the reviewed owner/installation manual, so do not imply one. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Dimensions
63 31/32 in H × 22 27/32 in W × 22 29/32 in D
Open full review
ManufacturerRinnai
Rinnai REHP80BM heat pump water heater

Official manufacturer details

Rinnai REHP50

Choose exact size
Rated storage
46 gal
First hour
73 gal
Input voltage
208–240V
UEF
3.75
Noise level (dBA)
49 dBA
Sound evidenceENERGY STAR exact-record sound_pressure_level Source for the selected size (opens in a new tab)
Minimum room air
700 ft³; 84–700 ft³ w/ louvers
Requirement detailsThe official 2026 manual says rooms above 700 ft³ need no added ventilation. Unducted rooms larger than 84 ft³ and below 700 ft³ require a fully or double-louvered door with 250 in² total net free area and 5 ft grille separation. It also documents a separate unducted 'room smaller than 450 ft³' arrangement with no numeric minimum, a 24 in² under-door air gap, an exhaust-height louver, and exhaust within 12 in of the door. Fully ducted rooms below 85 ft³ have no stated minimum; partially ducted rooms below 85 ft³ have no stated minimum but require the page-16 transfer-air arrangement. The overlapping 84/85/450 wording is preserved verbatim rather than silently normalized. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Dimensions
66.4 in H × 21.7 in diameter
Open full review
ManufacturerSANCO2
SANCO2 heat pump and hot water storage tanks

Official manufacturer details

SANCO2 GS5-45HPC HP + ECO-43SSAQB

Choose exact size
Rated storage
43 gal
First hour
73 gal
Input voltage
230 V
UEF
3.7
Noise level (dBA)
37 dBA outdoor unit
Sound evidenceoutdoor GS5-45HPC sound level, not indoor tank/whole-system sound This is the outdoor heat-pump component value, not a tank-generated or whole-system indoor acoustic measurement. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Minimum room air
N/A — outdoor heat pump
Requirement detailsThe official GS5 manual requires the GS5-45HPC heat-pump unit outdoors; the separate storage tank may be indoors or outdoors. Therefore an integrated-HPWH indoor room-volume minimum does not apply to these systems. Outdoor airflow clearances, an outdoor location, and the manual's maximum tank-to-heat-pump distance still apply. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Dimensions
38 1/8 in H × 24 1/2 in diameter
Open full review
ManufacturerStiebel Eltron
Stiebel Eltron Accelera heat pump water heaters

Official manufacturer details

Stiebel Eltron Accelera 220 E

Choose exact size
Rated storage
58 gal
First hour
51 gal
Input voltage
208–240V
UEF
3.115
Noise level (dBA)
45–52 dBA @ 1 m
Sound evidencesound pressure at 3.3 ft (1 m) versus sound power; do not compare as one metric The 45 dBA value conflicts with the current 2.2024 technical specification's 52 dBA value at the same stated distance. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Minimum room air
800 ft³ minimum
Requirement detailsThe official Accelera 220 E / 300 E manual says not to install in a room with less than 800 cubic feet total volume. The diagram labels the same example '800 ft2' but immediately gives 10 × 10 × 8 ft and the narrative explicitly says 800 cubic feet; this report follows the unambiguous volume statement. No manufacturer-approved duct/louver exception was found in the reviewed manual. Source for the selected size (opens in a new tab) Second source for the selected size (opens in a new tab)
Dimensions
60 7/8 in H × 27 1/8 in diameter
Open full review
How these manufacturers were selected

Different manufacturers were selected for a brand-diverse comparison. Current ENERGY STAR facts are shown where an exact or declared-series catalog binding exists; otherwise the missing catalog match is explicit.

This is a brand-diverse comparison—not a sales ranking, quality score, household-fit result, price claim, or recommendation. Sources reviewed 2026-08-28; refresh required before 2026-08-31.

See the manufacturers in one quick table
One representative heat-pump water-heater model from each featured manufacturer, compared using current ENERGY STAR-listed facts when available
Manufacturer and modelRated storageFirst hourInput voltage120V line optionUEFListed annual use
Rheem
PROPH40 T2 RH375-SO		N/AN/AN/AYes — separate exact modelN/AN/A
Cala Systems
RDH6524M1		N/AN/AN/AN/AN/AN/A
GE Profile
PH50S10BNY01		N/AN/AN/AYes — separate exact modelN/AN/A
A. O. Smith
HPTA-50 210		N/AN/AN/AYes — separate exact modelN/AN/A
Ariston
ARIHPWH-50		N/AN/AN/AN/AN/AN/A
Bosch
TR7000T – 50US		N/AN/AN/AN/AN/AN/A
Bradford White
RE2H50S10-1NCTT		N/AN/AN/AN/AN/AN/A
LG
APHWC501M		N/AN/AN/AN/AN/AN/A
Rinnai
REHP80BM		N/AN/AN/AN/AN/AN/A
SANCO2
GS5-45HPC HP + ECO-83SSAQB		N/AN/AN/AN/AN/AN/A
Stiebel Eltron
Accelera 220 E		N/AN/AN/AN/AN/AN/A
Advanced exact-model researchFor shoppers who already have a certification record or exact model number

The curated manufacturer reviews above are the simplest shopping path. Open these technical filters only when you need to inspect the underlying ENERGY STAR catalog or evaluate constraints you already measured.

Enter a need you estimated independently. This site does not estimate it from household size, bathrooms, fixtures, tank size, or other proxies. This threshold compares only with the current ENERGY STAR listed first-hour rating.
Clear filters
Evaluate products against constraints I supply

The evaluator makes no household assumptions. Enter at least one constraint you independently selected, measured, or confirmed. Inputs are used for this response only and are not saved, placed in the URL, sent to analytics, or used as a lead form.

Enter a gallon threshold you selected or obtained independently. The tool does not choose one for you.
Enter a gallon threshold you independently determined. The site does not estimate it from household size, bathrooms, fixtures, tank size, or another proxy; it compares only against the current listed first-hour rating.
Enter only a voltage confirmed from your installation requirements or by a qualified professional.
Choose only a type you have confirmed. Options must come from fresh eligible product records.
Enter measured available height in inches. Clearance requirements are separate and are not inferred.
Enter measured available width in inches. Clearance requirements are separate and are not inferred.
Enter measured available depth in inches. Clearance requirements are separate and are not inferred.
Enter a measured room volume in cubic feet. The tool does not estimate it from location type.
Enter only an amp rating confirmed by a qualified professional for the intended circuit.
Enter an independently determined temperature. No climate or location value is inferred.
Enter an independently determined temperature. No climate or location value is inferred.
Choose only a location type you have confirmed. Options must come from fresh verified manufacturer claims.
Select only when the installation requires a model documented to support ducting.
Optional decision priorities

Choose any topics you want emphasized in the later comparison. These non-personal selections change section order and visual emphasis only. They never change model order, fit status, eligibility, the choice default, or a destination.

Emphasize listed storage, first-hour rating, and recovery information.
Emphasize product dimensions, room volume, and separately documented clearances.
Emphasize current source-backed voltage, circuit, and breaker information.
Emphasize listed efficiency and annual energy-use facts without predicting cost or savings.
Emphasize current exact-model sound and feature evidence.
Emphasize location, ambient-air, ducting, and condensate requirements.

No decision priorities selected.

No fresh, publication-eligible product records match these filters.

Your savings snapshot

A clearer picture of your potential savings

Example using ZIP 90210

Calculating…/ year

Estimated energy cost savings

Compared with your current electric-resistance water heater.

A planning estimate—not a guaranteed bill reduction.

Location not yet confirmed

Example using ZIP 90210

Confirm a ZIP to update the state average and check current local incentives.

Based on your home
Rate used in estimate — CA residential average

Possible upfront incentive

Current incentives for your ZIP

Separate from yearly savings

Set your location

Confirm your ZIP or use your location to check current incentives automatically.

Your next step

Compare heat pump water heaters

See which source-backed models may fit your household.

Start comparing

This is a planning estimate, not a guarantee. Results vary. Eligibility, amounts, availability, and stacking are not guaranteed.

Method, sources & limitations

Geolocation runs only after you click. Coordinates go directly from your browser to the U.S. Census Geocoder. This site applies only the derived ZIP/state and sends the ZIP—not coordinates—to the U.S. EPA ENERGY STAR Rebate Finder. Calculator inputs are not stored, placed in URLs, or sent to Analytics.

The household choices use DOE 38-, 55-, and 84-gallon daily draw profiles as planning benchmarks. The HPWH estimate uses DOE’s ENERGY STAR reference UEF of 3.3 and a 67°F test temperature rise.

Electric-resistance comparisons use the selected state’s May 2026 year-to-date EIA residential average. Natural-gas and propane comparisons use national EIA averages. Utility prices are averages, not your tariff; results exclude installation, equipment cost, incentives, and financing.

EIA electricity pricesEIA natural-gas pricesEIA propane pricesDOE benchmarks